ADC Series Gauge Controller
The Active Digital Controller (ADC) is a compact single gauge controller and display. It features a bright LED display and simple push button controls. The ADC automatically recognises compatible Edwards gauges, loads the appropriate look-up table and displays the pressure in commonly used vacuum units.
Two versions are available; the standard ADC simply displays the pressure in choice of units, and the enhanced ADC includes a second gauge connection, two set-point relays, two analogue outputs and an RS232 interface. The ADC mk2 enhanced controller can now support 2 different gauges, e.g. APG200 and AIM.
Features and Benefits
- Plug and measure operation means you simply plug in the mains supply, connect the gauge and ADC displays the measured pressure.
- The ADC supports Edwards gauges with a total measuring range of 2000 to 1 x 10-9 mbar (1500 to 7.5 x 10-10 Torr).
- Bright LED display gives clear, long distance readability.
- The ADC displays units in mbar, Torr, Pascal or Volts.
- Small 1/8 DIN enclosure, may be panel or bench mounted.
- Simple push-button control makes operation highly intuitive.
General Product Information
Weight
0.330
Power Supply Phase
1-Ph
Supply Voltage
1Ph 100-120/200-240V 50/60Hz
Dimension Length
0.159
IP Rating
IP40
Dimension Height
0.043
Dimension Width
0.090
dimensionsCombinedLengthWidthHeight
0.159
0.159
0.159
Connection Power
IEC EN60320 C14 - Male (for C13 plug on mains cable)
Measurement Channels
2
Environmental Conditions
Temperature Ambient Operation Max
313.15
Temperature Ambient Operation Min.
273.15
Temperature Ambient Storage Min.
243.15
Temperature Ambient Storage Max.
343.15
Performance Data
Power Total Rated
15.00
Pressure Displayed Max.
2.000 × 10⁵
Connectivity - Communication Interface
Communication Interfaces Customer
RS232 (serial)
Connection electrical comms interface connector
RJ45 (FCC 68) - Female
